LED underwater light, also known as LED pool lights, is a kind of underwater light. It just refers to the lamp instalLED under water. The appearance is small and exquisite, beautiful and generous, the appearance is almost the same as some underground lamps, but there are more mounting chassis, the chassis is fixed with screws. Because the pool lights are used underwater, COMI LANDSCAPE LIGHTING can withstand pressure, generally made from USU316 stainless steel or SUS316L stainless steel or SUS304 stainless steel material, 8-10MM tempered glass, good waterproof joints, silicone rubber seal, multi-angle refraction curved glass, waterproof, Dustproof, leakproof and corrosion resistant erosion.
1. The LED underwater light of COMI LANDSCAPE LIGHTING is a kind of LED light source, which is monochromatic, or RGB or RGBW, or consists of underwater lighting with mixed colors of red, green and blue. It is the perfect choice for water mist pools, theme parks, exhibitions, commercial and artistic lighting. In order to make the LED underwater light with better dissipate heat and long lifetime of the LED underwater light, it is strongly recommended to place the light under water use.
2. In order to achieve a good waterproof effect of the LED underwater pool light, the protection effect of the COMI LANDSCAPE LIGHTING’s underwater pond lights are rated IP68 waterproof. It is recommended that the light be placed under the water at a depth of 1 to 1.5 meters, and some underwater lights can be placed in a place below 3 meters from the surface of the water. The good angle of light is 25~30 degrees or bigger for RGB color for a better color mixing. The controller controls the synchronization effect and can access the DMX console. Each unit has an address set separately, and the red, green and blue lights are composed of 3 DMX channels. There are two ways of external control and internal control. The internal control does not require an external controller, and it can set a variety of change modes (6 more). The external controller is equipped with an external controller, which can realize color changes.
3. The submersible LED lights adopts good and super bright LED as the light source, COMI LANDSCAPE LIGHTING’ pool light fixtures can emit light for 100,000 hours. Good light source materials make the lifetime of swimming pool LED lights longer and obtain satisfactory lighting effects.
4. The DMX512 LED underwater light is connected to the control system by a five-core wire (DMX+, DMX-, V+,V-, GND). The COMI LANDSCAPE LIGHTING’s lighting system includes a DMX controller, IP68 waterproof connection distribution boxes and lights and DMX512 underwater lighting fixtures can be placed in the water.
5. Some of COMI LANDSCAPE LIGHTING’s LED underwater light has a movable fixed fixture that can adjust the angle and position of the light. The design of the entire lamp perfectly prevents the corrosion of bromine and chlorine.
Click here >> C4XB0457 C4XB0418 4 * 2W or 3W Recessed LED Underwater Pool Lights , Asymmetrical LED Underwater Pond Lights
LED underwater light, also known as LED pool lights, is a kind of underwater light. It just refers to the lamp instalLED under water. The appearance is small and exquisite, beautiful and generous, the appearance is almost the same as some underground lamps, but there are more mounting chassis, the chassis is fixed with screws. Because the pool lights are used underwater, COMI LANDSCAPE LIGHTING can withstand pressure, generally made from USU316 stainless steel or SUS316L stainless steel or SUS304 stainless steel material, 8-10MM tempered glass, good waterproof joints, silicone rubber seal, multi-angle refraction curved glass, waterproof, Dustproof, leakproof and corrosion resistant erosion.
1. The LED underwater light of COMI LANDSCAPE LIGHTING is a kind of LED light source, which is monochromatic, or RGB or RGBW, or consists of underwater lighting with mixed colors of red, green and blue. It is the perfect choice for water mist pools, theme parks, exhibitions, commercial and artistic lighting. In order to make the LED underwater light with better dissipate heat and long lifetime of the LED underwater light, it is strongly recommended to place the light under water use.
2. In order to achieve a good waterproof effect of the LED underwater pool light, the protection effect of the COMI LANDSCAPE LIGHTING’s underwater pond lights are rated IP68 waterproof. It is recommended that the light be placed under the water at a depth of 1 to 1.5 meters, and some underwater lights can be placed in a place below 3 meters from the surface of the water. The good angle of light is 25~30 degrees or bigger for RGB color for a better color mixing. The controller controls the synchronization effect and can access the DMX console. Each unit has an address set separately, and the red, green and blue lights are composed of 3 DMX channels. There are two ways of external control and internal control. The internal control does not require an external controller, and it can set a variety of change modes (6 more). The external controller is equipped with an external controller, which can realize color changes.
3. The submersible LED lights adopts good and super bright LED as the light source, COMI LANDSCAPE LIGHTING’ pool light fixtures can emit light for 100,000 hours. Good light source materials make the lifetime of swimming pool LED lights longer and obtain satisfactory lighting effects.
4. The DMX512 LED underwater light is connected to the control system by a five-core wire (DMX+, DMX-, V+,V-, GND). The COMI LANDSCAPE LIGHTING’s lighting system includes a DMX controller, IP68 waterproof connection distribution boxes and lights and DMX512 underwater lighting fixtures can be placed in the water.
5. Some of COMI LANDSCAPE LIGHTING’s LED underwater light has a movable fixed fixture that can adjust the angle and position of the light. The design of the entire lamp perfectly prevents the corrosion of bromine and chlorine.
Click here >> C4XB0457 C4XB0418 4 * 2W or 3W Recessed LED Underwater Pool Lights , Asymmetrical LED Underwater Pond Lights
