|
Product Details:
|
| Item Type: | 100W Switching Power Supply | Input Voltage: | 85~132VAC/180~264VAC Selected By SW 254~370VDC |
|---|---|---|---|
| Output Voltage: | 5V, 12V, 15V, 24V, 36Vdc And Etc | Output Power: | Max 100W |
| Protection: | Short Circuit/Overload/over Voltage/over Temperature | Cooling Way: | Cooling By Free Air Convection |
| IP Rating: | IP20 | Warranty: | 2 Years |
| High Light: | led strip power supply,led switching power supply |
||
85 - 264VAC Input Mean Well SE-100 series 100W Switching Power Supply UL Listed
● Non-PFC, complete protections
● Economical medium to high power models with safety certificate;
● AC input range selectable by switch
● Protections: Short circuit/Overload/over voltage/over temperature
● Cooling by free air convection
● Withstand 300VAC surge input for 5 second
● Buit-in constant current limiting circuit
● 100% full load burn-in test
● LED indicator for power on
● Fixed switching frequency at 90KHz
● Low cost, high reliability
● Output Voltage 12V and 24VDC are usually used for linear strip or linear bar;
● Compliants: CE,ROHS,UL,CB,CCC
● 2 Years warranty
| MODEL | SE-100-5 | SE-100-12 | SE-100-15 | SE-100-24 | SE-100-48 | |
| OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V | 48V |
| RATED CURRENT | 20A | 13.6A | 7A | 4.5A | 2.3A | |
| CURRENT RANGE | 0~20A | 0~8.5A | 0~7A | 0~4.5A | 0~2.3A | |
| RATED POWER | 100W | 102W | 105W | 108W | 110.4W | |
| RIPPLE&NOISE(max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | |
| VOLTAGE ADJ. RANGE | 4.75~5.5V | 11.4~13.2V | 14.25~16.5V | 22.8~26.4V | 45.6~52.8V | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| SETUP,RISE TIME | 500ms, 20ms/230VAC ,500ms, 20ms/115VAC at full load | |||||
| HOLD UP TIME(Typ.) | 30ms/230VAC 25ms/115VAC at full load | |||||
| INPUT | VOLTAGE RANGE | 85~132VAC/176~264VAC selected by SW 248~373VDC | ||||
| FREQUENCY RANGE | 47~63Hz | |||||
| EFFICIENCY (Typ.) | 80% | 83% | 84% | 86% | 86% | |
| AC CURRENT (Typ.) | 2A/115VAC ,1.2A/230VAC | |||||
| LEAKAGE CURRENT | <2mA / 240VAC | |||||
| PROTECTION | OVERLOAD | 11~150% rated output power | ||||
| Protection type:shut down o/p voltage, re-power on to recovery | ||||||
| OVER VOLTAGE | 5.75~6.75V | 13.8~16.2V | 17.25~20.25V | 27.4~32.4V | 55.2~64.8V | |
| Protection type:shut down o/p voltage, re-power on to recovery | ||||||
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down | |||||
| ENVIRONMENT | WORKING TEMP. | -10~+60℃ (Refer to "Derating Curve") | ||||
| WORKING HUMIDITY | 20~90% RH non-condensing | |||||
| STORAGE TEMP., HUMIDITY | -40~+85℃, 10~95% RH | |||||
| TEMP. COEFFICIENT | ±0.05% / ℃ (0~50℃) | |||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||||
| SAFETY | SAFTY STANDARDS | UL60950-1 approved | ||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||||
| ISOLATION RESISTANCE | I/P-O/P,I/P-FG,O/P-FG:100M Ohms / 500VDC /25℃ / 70% RH | |||||
| OTHERS | MTBF | 200K hrs min. MIL-HDBK-217 (25℃) | ||||
| DIMENSION | 159*97*38MM (L*W*H) | |||||
| PACKING | 0.55Kg: 30PCS/17.5Kg/0.95CUFT | |||||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|||||
Contact Person: Michael Yang
Tel: +8615017923616
