|
Product Details:
|
| Item Type: | 12V Or 24V 20W IP67 LED Power Supply | Input Voltage: | 170~250VAC,50/60Hz |
|---|---|---|---|
| Output Voltage: | 12VDC Or 24VDC Options | Output Current: | 2.5A(12V) , Or 1.25A(24V) |
| Output Power (W): | 0-30W | Slim Size: | L182*W29*H20mm |
| IP Rating: | IP67 Waterproof | Warranty: | 2 Years |
| High Light: | led strip power supply,single output power supply |
||
HVD-12030A, HVD-24030A 12V or 24VDC 30W Fully Encapsulated IP67 Waterproof Slim Profile Mini Isolated LED Power Supply 170~250VAC Input
Features:
1. Short Circuit/Over load/Overheat Protection;
2.Fully encapsulated with IP67 level;
3. 100% full load burn-in test;
4. Cooling by free air convection
5. Suitable for LED Lighting and moving sign applications
6. 3Years warranty
SPECIFICATION:
| MODEL | HVD-12030A | HVD-24030A | |
| OUTPUT | DC Voltage | 12V±0.5V | 24V±0.5V |
| Rated Current | 2.5A | 1.25A | |
| Rated Power | 30W | 30W | |
| Ripple & Noise | ≤300mVpp | ≤500mVpp | |
| Hold up time | ≤2s | ||
| INPUT | Voltage Range | 170~250VAC | |
| Frequency Range | 50/60Hz | ||
| Input Power | ≤38W | ≤38W | |
| Power Factor | PF≥0.5 | ||
| Efficiency | ≥82% | ≥83% | |
| Inrush current | cold Start:25A/230VAC | ||
| Leakage Current | ≤0.75mA/240VAC | ||
| Protection | Over Loading | 120～150% | |
| Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed. | ||
| High Temp | 100℃±10℃ Shut down, repower on to recover) | ||
| Voltage Resistance | Input-Output | AC 1.5KV/5mA 5s | |
| Input-Housing | AC 1.5KV/5mA 5s | ||
| Environment | Working Temp. | -25℃～+40℃ | |
| Working Humidity | 10-90% RH non-condensing | ||
| Storage Temp. | 40℃～+60℃,10～95%RH | ||
| Cables | Input | VDE H03VVF 3G0.75mm² Black *200mm | |
| Output | VDE H03VVF 2*0.75mm² White *200mm | ||
| Others | Housing Material | Aluminum Housing | |
| IP Rating | IP67 | ||
| Dimension | L182*W29*H20mm | ||
| Packing | 11.5kg/50pcs/Carton | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. | ||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||
| 3. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. | |||
| 4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. | |||
| 5. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes. | |||
1. 1piece/inner box;
2. 50pcs/carton
Contact Person: Mr. Michael Yang
Fax: 86-755-23159362
