|Name:||Solar Post Top Lights||Power:||50W, 80W, 100W|
|Solar Panel Max Power:||18V/60W(for 50W), 18V/100W(for 80W), 18V/130W(for 100W)||Light Efficiency:||120LM/W|
|Charge Time:||6-7hours||Discharge Time:||10-12hours|
|Sensor:||Default:PIR Sensor&Time Controller Together||Controller:||PWM Controller, MPPT Controller Optional|
|IP Rate:||IP65||Warranty:||3 Years|
solar battery motion light,
solar panel motion detector light
All ine one solar area light available in 50watt to 100Watts is the most popular solar Light in the market now. The product has the characteristics of long life and High energy efficiency.
50W all in one solar area light can be replaced 150w traditional Light bulb, saving more than 70~80% of power compared with traditional Light bulb.
1. Beam angle:120 degrees.
2. Aluminum die-casting heat sinks is good for heat dissipation.
3. It's major to replace the conventiona area light.
4. Green, energy saving, long and reliable life of 50,000 hours.
5. No RF interference, No IR/UV radiation ,no mercury pollution.
6. Wide colour availability in degrees Kelvin(K),2700-6700K.
7. Streamline exterior design, beautiful appearance.
8. Environment friendly ,energy saving (70~80%).
9. Special circuit design, each LED work separately,avoiding the single broken LED influence problem.
|LED MAX Power||50W||80W||100W|
|Solar panel Max power||18V/60W||18V/100W||18V/130W|
|Solar Panel Dimension||Dia850*41mm|
|Lamps material of main||Metal|
|Space Bettwen Light||20-30m||30-40m||40-50m|
|Sensor||Default:PIR Sensor&Time Controller together.|
|Controller||PWM controller, MPPT controller optional|
|Battery||Ternary Li-ion battery, LiFePO4 battery optional|
|Charge Time||6-7hours(with enough strong shine)|
|Solar Cell||High efficiency imported silicon solar cell|
|Light Source||SMD LED|
|Operation Temp||-40 to +45℃|
|CCT||2700K SW / 3000K WW /
4100K NW / 5000K DW / 5700K CW
|Life Span||50,000 hours at 25℃|
|Other||Mains complementary solar energy is avaiable,pls contact sales for this function price|
Optional Function for product:
1. When the light sensor is sensing suitable dark, the lighting fixture will be turned on automatically. As the lighting fixture is lighting on in 4hours, the light output will be adjusted to 30% of the max brightness output. When the light sensor is sensing suitable daylight, the lighting fixture will be turned on automatically(Please view Fig.-1).
2. Intelligent light sensing Control Solar Street lamp(Fig.-2):
(1) When the light sensor is sensing suitable dark, the lamp is start to work BUT not light on;
(2) When it work in 4 hours, the lamp will be lighting on and with 30%~50% light output;
(3) When it work in 6hours, the lamp will be with 70% light output until the sensor is sensing suitable daylight, and then turned off( optional function).
3. Other function options:
You can control the time of turned on and the time of turned off , and the lumen output ratio for your project demand.
Contact Person: Mr. Michael Yang